1. Choose the output #1 control signal
On/Off, 4CPH
Analog 0-10Vdc

2. Choose the xxx xxx xxx (Check the question)
Notinstalled
On/Off, 4CPH

3. Choose the control mode
Humidify
Dehumidify
Humidify output #1
    Dehumidify output #2

4. Choose the main sensor location
Inside thermostat
Duct mount - stat on duct
Duct mount - stat on wall
Remote wall mount

5. Choose high limit sensor and outside temperature reset settings
No high limit and outside temperature reset capability
Both capabilities - No sensors included
Both capabilities - High limit sensor included only
Both capabilities - Outside air sensor included only
Both capabilities - Both sensors included