Home > Electronic Heat Controls

Electronic Heat Controls

Viconics turns up the heat when is comes to electric heat controls. Choose between solid state relays, solid state relays with integrated heat sink, SCR power controls with various choice of analog input signals, electronic relays for electric baseboard heaters and Vernier low voltage step controllers

R805

Solid State Relay

Solid State Relay
Solid state relays are electronics switches, which have the advantage of being completely noiseless and can withstand millions of cycles. Because of this, they are very useful in applications where loads must be switched in close proximity to occupants such as office buildings, hotels and museums. They are also very useful to proportionally control...
Full details

R810

Solid State Relay with Integrated Heat Sink

Solid State Relay with Integrated Heat Sink
Viconics’ R810 power switches have been designed for safe and reliable control of electric heat loads. This broad line of value priced products is used by most major North American duct heater manufacturers. The appropriate PWM or pulsed input signal can be provided by a DDC panel or Viconics’ own C1015 or C1025 thermostat. For a.c. fired inputs, a...
Full details

R850

Vernier Low Voltage Step Controller

Vernier Low Voltage Step Controller
The R850 series low voltage (24 V a.c.) electronic step controller is designed for cost-effective and precise control of multi-stage applications typically found in electric duct heaters and boilers. Available in four or eight stage models, the product can also be used in conjunction with the R810 power switch or R820 SCR power controller, which wi...
Full details

R820

SCR Power Controllers

SCR Power Controllers
Viconics’ R820 SCR power controller has been designed for safe and reliable control of electric heat loads. By offering a competitive price, the use of SCR’s is no longer an expensive proposition as was the case just a few years ago. As a result, this broad line of products is used by most major North American duct heater manufacturers. Input signa...
Full details

R851B/V

Line Voltage Step / Vernier Controller

Line Voltage Step / Vernier Controller
The R851B/V series line voltage ( up to 240 V a.c.) electronic step controller is designed for cost-effective and precise control of multi-stage applications typically found in electric duct heaters and boilers. Available in four or eight stage models, the R851V can also be used in conjunction with the R810 power switch or R820 SCR power controller...
Full details

C1025X-1000

Electronic Controller

Electronic Controller
The C1025F-1000 series controllers are microcomputer-based, proportional and integral (PI) devices with one analog 0 to 10 VDC output and one VDC time proportioning pulsed output.The analog 0 to 10 VDC modulating output can control the room or supply temperature by modulating directly a 0 to 10 VDC SCR power controller.The VDC pulsed output can con...
Full details