Home > Wireless Components & Accessories

Wireless Components & Accessories

Our full range of wireless components and accessories have been designed to work seamlessly with our other wireless enabled controllers.

GW2-0I0-00

GW2 Wireless Gateway Manager

GW2 Wireless Gateway Manager
The GW2 Wireless Gateway Manager is targeted for either retrofit or new construction applications where the addition of communicating field bus wiring within the building space is prohibitive. The GW2 and Communicating Room Controllers with a wireless field bus encourages the use of existing wiring utilized by existing electronic controller type co...
Full details

VCM8000V5000P (ZigBee Pro)

Wireless Communication Module for the VT8000 Room Controller

Wireless Communication Module for the VT8000 Room Controller
VCM8000V5000P communication modules are easy to install and are specifically designed to enable upgrades to the communication capabilities of the VT8000 Series Network-ready Room Controllers. Adding a communication module only takes a few minutes and provides big advantages to existing installations that require network and functionality. All cur...
Full details

VCM8001V5045

CO2 Sensor Module

CO2 Sensor Module
CO2 Sensor Module Out-of-the-box CO2 sensor module to improve fresh air quality in schools, restaurants, offices and other small buildings.
Full details

SED-WDS-P (ZigBee Pro)

SED-WDS-P Wireless Window and Door Sensor

SED-WDS-P Wireless Window and Door Sensor
The SED-WDS-P door and window contact switch communicates wirelessly with any VT8000 Series Room Controllers, reporting when doors and windows are opened or closed. Using this information, the VT8000s advanced occupancy management control sequences regulate HVAC equipment and other connected systems to maximize energy savings without compromizing c...
Full details

SED-WMS-P (ZigBee Pro)

SED-WMS-P Wireless Wall Mounted Sensor

SED-WMS-P Wireless Wall Mounted Sensor
The SED-WMS-P wall-mounted motion sensor communicates wirelessly with VT8000 Series Room Controllers, reporting occupant motion from anywhere within its viewing range. Using this additional information, the VT8000s advanced occupancy management control sequences regulate HVAC equipment and other connected systems to maximize energy savings without ...
Full details

SED-CMS-P (ZigBee Pro)

SED-CMS-P Wireless Ceiling Mounted Sensor

SED-CMS-P Wireless Ceiling Mounted Sensor
The SED-CMS-P ceiling-mounted motion sensor communicates wirelessly with VT8000 Series Room Controllers, reporting occupant motion from anywhere within its viewing range. Using this additional information, the VT8000s advanced occupancy management control sequences regulate HVAC equipment and other connected systems to maximize energy savings witho...
Full details

SED-WIN & SED-DOR (ZigBee Pro) for VT7000 Series

SED-WIN & SED-DOR series ZigBee Pro™ wireless switches for VT7000 Series

SED-WIN & SED-DOR series ZigBee Pro™ wireless switches for VT7000 Series
The SED-WIN & SED-DOR series ZigBee Pro™ wireless switches are used with the wireless versions of VT7000 Series Terminal Equipment Controllers. A typical hospitality application is where the VT7000 wall terminal equipment controller has an on-board PIR sensor and wireless switches are used to monitor the opening and closing of doors and windows. W...
Full details

VCM7000 Series (ZigBee Pro \ Classic ZigBee)

Communication Module for VT7000 Series Controllers VCM7000

Communication Module for VT7000 Series Controllers VCM7000
VCM7000 Series communication modules are easy to install. Network-ready VT7000 Series room controllers are specifically designed to enable upgrades to their communication capabilities. Accessory communication modules allow the upgrade of all network-ready VT7000 Series room controllers to support communication.All current network-ready Viconics` V...
Full details

VWG-APP-1000 (Classic ZigBee)

VWG-APP-1000 Wireless Communication Card & Driver

VWG-APP-1000 Wireless Communication Card & Driver
The Viconics VWG-APP-1000 Wireless Communication Card has been primarily designed to target retrofit opportunities. It is ideally suited for use in situations where the installation of new communicating field bus wiring within an existing building space is not feasible due to excessive installation costs or physical obstacles.Now the VWG-APP-1000 W...
Full details

VRP5000 (Classic ZigBee)

VRP5000 Wireless Repeater

VRP5000 Wireless Repeater
The VRP5000W1000W wireless repeater has been specifically designed to be used within a Viconics wireless ZigBee network for Viconics wireless controllers. The repeater is intended to be a low cost communication bridge component which will allow for extended range when some remote controllers are located too far from the main mesh of Viconics device...
Full details

VWA5000 (Classic ZigBee)

Wireless Window and Door Switch - Discontinued - *Contact the Sales Team

Wireless Window and Door Switch - Discontinued - *Contact the Sales Team
Viconics has developed its new VWA5000 Series wireless window and door switch accessories for use in Hotels, Schools, Dorm rooms and Military Barracks. These new wireless switches can be easily installed and allow for monitoring of typical entry points such as doors, patio doors and windows. Used in conjunction with a local passive infrared motion ...
Full details

VT7682S

VT7682S Wireless Central Manager - Discontinued - *Contact the Sales Team

VT7682S Wireless Central Manager - Discontinued - *Contact the Sales Team
The Viconics VT7682S Wireless Central Manager allows for simple yet flexible management of multiple equipment controllers from one convenient location. Facility managers can now efficiently administer parameters for up to 60 room controllers with one Wireless Central Manager, saving both time and effort.The Wireless Central Manager is compatible wi...
Full details

VST5000 (Classic ZigBee)

VST5000 Wireless Survey Tools - Discontinued - *Contact the Sales Team

VST5000 Wireless Survey Tools - Discontinued - *Contact the Sales Team
The Viconics wireless survey tools have been designed to facilitate the verification and validation of the deployment of the Viconics wireless controllers on a potential job site. The survey tools display a numerical percentage value on the LCD screen which represents the wireless network ZigBee RSSI dBi value (Receiving Signal Strength Indicator)....
Full details

VWG-50 (Classic ZigBee)

VWG-50 Wireless Gateway - Discontinued - Limited quantities still available *Contact the Sales Team

VWG-50  Wireless Gateway - Discontinued - Limited quantities still available *Contact the Sales Team
The high installation costs associated with passing new field communication wiring for building retrofit projects has always been one of the principal deciding factors that ultimately determines whether a building upgrade is feasible or not. In many cases, wiring costs associated with building upgrades deems a project as being cost prohibitive and ...
Full details