Wireless Components & Accessories

VCM8002V5031 (WI-FI)

BACnet IP over WI-FI communication card for VT8000 room controllers

The VCM8002V5031 Wi-Fi communication module allows the upgrade of VT8000 series Room Controllers to support networking communication using the IEEE 802.11 (Wi-Fi) wireless local area network. VT8000 series Room Controllers are capable of being retrofitted in the field with an accessory communication module, which enables the controllers to be inte...

Full details

VCM8000V5000P (ZigBee Pro)

Wireless Communication Module for the VT8000 Room Controller

VCM8000V5000P communication modules are easy to install and are specifically designed to enable upgrades to the communication capabilities of the VT8000 Series Network-ready Room Controllers. Adding a communication module only takes a few minutes and provides big advantages to existing installations that require network and functionality. All cur...

Full details

GW2-0I0-00

GW2 Wireless Gateway Manager

The GW2 Wireless Gateway Manager is targeted for either retrofit or new construction applications where the addition of communicating field bus wiring within the building space is prohibitive. The GW2 and Communicating Room Controllers with a wireless field bus encourages the use of existing wiring utilized by existing electronic controller type co...

Full details

VCM8001V5045

CO2 Sensor Module

CO2 Sensor Module Out-of-the-box CO2 sensor module to improve fresh air quality in schools, restaurants, offices and other small buildings.

Full details

SED-CO2-G-5045 & SED-TRH-G-5045

Wireless CO2 Sensor

Wireless CO2 Sensor Comfort is more than just a serene, pleasant ambiance.It’s also about clean, fresh air, and ensuring a healthyenvironment inside a building. Whether you’re in a school, restaurant, office or othersmall building, the CO2 + TRH Sensor will help ensure thewell-being of your customers, students, or personnel. Putting you on the f...

Full details

SED-WLS-G-5045 (ZigBee Pro)

SED-WLS-G-5045 Wireless Water Leakage Sensor

The water leak sensor is easy to install and communicates with the SE8000 room controller using the latest ZigBee protocol for faster response times and more accurate inputs for each zone. And it can be integrated into Building Management Systems for overall building supervision. It is ideal for offices, hotels, schools, dormitories, military barra...

Full details

SED-WDC-G-5045 (ZigBee Pro)

SED-WDC-G-5045 Wireless Window & Door Sensor

The wireless door/window sensor is easy to install and communicates with the SE8000 room controller using the latest ZigBee protocol for faster response times and more accurate inputs for each zone. It can be integrated into Building Management Systems for overall building supervision. It is ideal for offices, hotels, schools, dormitories, military...

Full details

SED-MTH-G-5045 (ZigBee Pro)

SED-MTH-G-5045 Wireless Motion, Temperature & Humidity Sensor

The wireless motion sensor can be mounted on any wall or ceiling. Easy to install, it communicates with the SE8000 room controller using the latest Zigbee protocol for faster response times and more accurate inputs for each zone. It can also be integrated into Building Management Systems for overall building supervision. It is ideal for offices, ho...

Full details

SED-WMS-P (ZigBee Pro)

SED-WMS-P Wireless Wall Mounted Sensor

The SED-WMS-P wall-mounted motion sensor communicates wirelessly with VT8000 Series Room Controllers, reporting occupant motion from anywhere within its viewing range. Using this additional information, the VT8000s advanced occupancy management control sequences regulate HVAC equipment and other connected systems to maximize energy savings without ...

Full details

SED-CMS-P (ZigBee Pro)

OBSOLETE - SED-CMS-P Wireless Ceiling Mounted Sensor

The SED-CMS-P ceiling-mounted motion sensor communicates wirelessly with VT8000 Series Room Controllers, reporting occupant motion from anywhere within its viewing range. Using this additional information, the VT8000s advanced occupancy management control sequences regulate HVAC equipment and other connected systems to maximize energy savings witho...

Full details

SED-WIN & SED-DOR (ZigBee Pro) for VT7000 Series

OBSOLETE - SED-WIN & SED-DOR series ZigBee Pro™ wireless switches for VT7000 Series

The SED-WIN & SED-DOR series ZigBee Pro™ wireless switches are used with the wireless versions of VT7000 Series Terminal Equipment Controllers. A typical hospitality application is where the VT7000 wall terminal equipment controller has an on-board PIR sensor and wireless switches are used to monitor the opening and closing of doors and windows. W...

Full details

SED-WDS-P (ZigBee Pro)

OBSOLETE - SED-WDS-P Wireless Window and Door Sensor

The SED-WDS-P door and window contact switch communicates wirelessly with any VT8000 Series Room Controllers, reporting when doors and windows are opened or closed. Using this information, the VT8000s advanced occupancy management control sequences regulate HVAC equipment and other connected systems to maximize energy savings without compromizing c...

Full details

VWG-APP-1000 (Classic ZigBee)

VWG-APP-1000 Wireless Communication Card & Driver

The Viconics VWG-APP-1000 Wireless Communication Card has been primarily designed to target retrofit opportunities. It is ideally suited for use in situations where the installation of new communicating field bus wiring within an existing building space is not feasible due to excessive installation costs or physical obstacles.Now the VWG-APP-1000 W...

Full details

VCM7000 Series (ZigBee Pro \ Classic ZigBee)

Communication Module for VT7000 Series Controllers VCM7000

VCM7000 Series communication modules are easy to install. Network-ready VT7000 Series room controllers are specifically designed to enable upgrades to their communication capabilities. Accessory communication modules allow the upgrade of all network-ready VT7000 Series room controllers to support communication.All current network-ready Viconics` V...

Full details